Tommee Tippee Perfect Prep Bottle Preparation System Black

Tommee Tippee Perfect Prep Bottle Preparation System

An innovative system for preparing powdered milk to help parents prepare baby bottles.

Tommee Tippee Perfect Prep Bottle Preparation System prepares the bottle at the right temperature (37° C) in just 2 minutes.

Filter the water and eliminate any bacteria that may be present in the powdered milk.

Easy to use and clean thanks to the self-cleaning anti-limescale function.

Fits most baby bottles.

It features a small and compact design, perfect for modern kitchens.

Features:

Can be used for any type of milk powder
Proportionate preparation (from 113 ml up to 340 ml)
Dispenses an exact amount of water, for a more precise and constant dilution
Complete with filter (maximum duration 3 months)
Easy to clean (the device has a light that warns you when the cleaning cycle needs to be performed).

How does it work:

1. choose the quantity of milk to prepare
2. Insert the bottle under the dispenser
3. a jet of water at 70° is delivered to sterilize and eliminate any bacteria present in the powdered milk
4. add and mix the milk powder
5. Place the bottle back under the dispenser, the remaining water is dispensed at the correct temperature to obtain a 37°C bottle.

How to clean it:

For the initial cleaning cycle, a little boiling water is all that is needed…

1. Press the cleaning button on the side of the device for two seconds to start a cleaning cycle. The cleaning light will turn on.
2. Discard contents in used container.
3. Fill a kettle with water. Reassemble the clean tank and fill the water tank with boiled water. Replace the empty container under the spout.
   Press the cleaning button on the side of the device for two seconds to start a cleaning cycle. The cleaning light will come on. Wait for the cycle to complete, using the pause function if necessary.
4. The empty tank warning light will come on once water has arrived in the system.
5. Empty the contents of the container by placing the container back under the spout.
6. Reconnect the Tommee Tippee filter to the tank, taking care to only touch the top of the filter.
7. Add fresh water to the tank, placing the lid once full. Wait for the water to pass through the filter and for the empty tank warning light to go off.
8. To prepare the device for the next use, set the hand to 4oz and press the start/stop button to dispense cold water. Once the operation is complete, press the start/stop button again to dispense the remaining water to end the cycle.
9. Discard the contents of the first bottle after cleaning.
10. Replace the clean bottle holder and the device is ready for use.

If the unit has not been used for 7 days or more, you can choose between two cleaning options:

1. Using a cold water sterilizing solution (following the manufacturer's guidelines for using 1,8 liters of water), add the required amount to the water tank. Fill the tank with water to the max line and place a suitable container under the dispensing spout.
2. Place 1 litre of white vinegar (food grade) into the water tank. Fill the water tank to the maximum line with freshly boiled water and place a suitable container under the dispensing spout.

If the unit has not been used for 7 days or more, you can choose between two cleaning options:

1. Using a cold water sterilizing solution (following the manufacturer's guidelines for using 1,8 liters of water), add the required amount to the water tank. Fill the tank with water to the max line and place a suitable container under the dispensing spout.
2. Place 1 litre of white vinegar (food grade) into the water tank. Fill the water tank to the maximum line with freshly boiled water and place a suitable container under the dispensing spout.

NOTE: If you are also changing the Tommee Tippee water filter, press the filter reset button for two seconds to reset the device's memory before using it.

The package contains:

1 bottle preparer
1 water filter
1 Close to Nature 150 ml bottle.